Automatic Garage Door Issues – Some Frequently Asked Questions


Whenever you look to invest in an automatic garage door, it is important you take expert advice from a respected automatic gate supplier operating near you. Investing in an automatic door for your garage security is a quality long-term investment. And regardless of whether you opt for a belt-driven operator or a modern-chain door; you need to check every crucial aspect and even ask questions to your chosen supplier before making a final decision.

But with that; you also need to be informed about its common door issues and consult your experts on how to resolve it. Here are some frequently asked questions on common automatic garage door issues. Follow closely!
  • (Me) Why Doesn’t My Electric Garage Door Open Or Close All The Way?
(Company) If you find your automatic garage door not opening or closing all the way, then the issue could be due to imprecise travel limits. To resolve it, you need to open the manufacturer’s instruction manual, properly inspect the door alignment and if needed, reset it’s opening and closing limits.
If this doesn’t give you the desired results, then you should check the condition of the travel limit switch, even its logic board. If repairs or replacements are needed, get it serviced professionally.
  • (Me) What Causes My Garage Door To Close & Then Reverse Back Up Again?
(Company) If you notice your garage door travelling all the way down to close and then for some reason comes back up again, then you need to inspect if something is obstructing its beam in-between its safety sensors located at the base of its rails. You also need to properly check the door’s sensor alignment.

Generally, when your garage door closes first and then reverses back, the issue could also be due to the close limit. You should look into its setting to check if it is not set to a point beyond its complete closure. If that is the case, re-adjust the close limit. It should take care of the problem.
  • (Me) What To Do With An Auto Garage Door That Won’t Open?
(Company) When you find your automatic garage door not opening smoothly as it should, then the issue could be due to some physical obstruction between your garage door remote and its receiver. That could be preventing the signal from transmitting.

You should use the wall controller to check if the door opens properly. If it doesn’t then it could also be due to some bindings caused by the door tracks. It may need re-adjusting. In addition to these, a damaged logic board could also cause this problem from happening.

If that is the scenario, then you should not delay in contacting your trusted automatic gate suppliers in Australia for proper advice, quality repair or necessary replacements.

Comments

Popular posts from this blog

6 Advantages of Installing Automatic Sliding Gates at your Home

Signs that Tell it’s Time to Change Your Sliding Driveway Gate Motor

Know the Things to Consider Before Installing the Automatic Gate